Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.5.1
Page 95
Document 0743
Revision 14
June 2002
Cisco Router
Management Module Information
MM Part Number Device(s) Firmware Version
SM-CIS1001 Rtr_Cisco (Cisco Router 2)
Rtr_CiscoIGS, CGS, AGS, MGS,
2500, 3000, 4000, 7000
11.1(8)
11.2
SM-CIS1002 Lightstream 10.10 (ATM
Support)
11.2(5)/
wa3(2b)
Known Anomalies
Item Description Solution
1 The Cisco 3T MIM is not recognized in
hub or MMAC Chassis views.
This is a firmware issue.
2 Modeling a Cisco 4000 with the
Rtr_Cisco4000 model type generates a
wrong model type alarm.
Model all Cisco Routers with firmware
version 10 and higher using the
Rtr_Cisco model type.
3 The CiscoView menu option and the
CiscoView button in the Cisco Router
management module do not work.
You must install the Ciscoview product
and define the path to the executable as
the environment variable
CVIEW=<path to exe>.
Place the environment variable in the file
/opt/SPECTRUM/Spectrum60.env for
Solaris, or in the System Environment
variables (system variables) for
Windows NT/2000.
4 When a Cisco Router is modeled using
the Rtr_Cisco model type, some
application models do not display.
This is an issue with firmware version 8.1
and earlier. Since the Cisco Router
management module now supports
10.0, the application models should
display.
5 Some Cisco device models let you enter
any Community Name or none at all,
which does not affect the model status;
it stays green. However, if you remove
an entered string, the model turns to the
orange alarm state.
Cisco devices can be configured to
respond to all SNMP requests without
checking the Community Name.