User`s guide

USER’S GUIDE
116 SFVRA Connection Manager
SFVRA Connection Manager: 1038 This ADD only available in CyberSWITCH UPDATE mode. Please
ADD the CyberSWITCH first.
In order to add a user to a CyberSWITCH’S Priority User list, the CyberSWITCH must be
previously configured in the database. Click Add at the bottom of the dialog to write the
CyberSWITCH information to the database, and then click Add in the ISDN Users box or in the
Modem Users box to configure Priority Users.
SFVRA Connection Manager: 1039 CyberSWITCH Name cannot be left blank.
A CyberSWITCH Name must be specified before adding a CyberSWITCH to the database. This
CyberSWITCH Name does not necessarily need to be the same as the System Name configured on
the CyberSWITCH.
SFVRA Connection Manager: 1040 User Name cannot be left blank.
A User Name must be specified before adding a User to the database. This User Name must match
the System Name of the remote device that contacts the central site CyberSWITCH systems.
SFVRA Connection Manager: 1041 Reports not available. You must set a default printer.
A default printer must be assigned in order for Reports to function, even if you plan to print to a
file. Configure a printer for the PC or network.
SFVRA Connection Manager: 1042 This CyberSWITCH Name already exists in the database.
A CyberSWITCH Name must be unique. Currently the database is not case sensitive. Choose a
different CyberSWITCH Name.
SFVRA Connection Manager: 1043 Number must be numeric.
Addition of a Telephone Number or Calling Line ID failed. The number must not contain non-
numeric characters.
SFVRA Connection Manager: 1044 Invalid TCP Port value.
Reconfigure the TCP Port value to be numeric.
SFVRA Connection Manager: 1045 Name cannot be blank and cannot exceed 16 characters.
In order to configure a User Category or a CyberSWITCH - User Group, the name must be at least
one character in length, and not exceed 16 characters. Rename the category or group.
SFVRA Connection Manager: 1046 This entry already exists in the table.
A User Category name and a CyberSWITCH - User Group name must be unique. Currently the
database is not case sensitive. Configure a new name for the User Category or CyberSWITCH - User
Group.
SFVRA Connection Manager: 1047 Unable to add entry containing the single quote (’) character.
The User Category name and the CyberSWITCH - User Group name can contain any printable
character except the single quote (’) character. Re-enter the name so that it does not use the single
quote (’) character.
SFVRA Connection Manager: 1048 This Group has already been configured for another Network Proxy
Service. A Group can only be configured for one Network Proxy Service.
Groups can only be configured for one Network Proxy service so that routes are not advertised by
multiple servers and, therefore, accessed by differing CyberSWITCH systems.