User`s guide

USER’S GUIDE
192 SFVRA Connection Manager
4. Enable the AppleTalk Protocol.
In order for the Remote Access Switches to be able to communicate with each user, the protocol
used by the user needs to be identified. Select AppleTalk on the Protocols tab and Enable
AppleTalk. Enter
0 for the Network Number. Enter 0 for the Node ID. Select None as the Routing
Protocol.
Note: Although “SITE2” is a callable user, the Callable feature can not be enabled until a
telephone number is configured. We will refer back to the AppleTalk tab later on in this
example to enable this feature.