User`s guide

SFVRA Connection Manager 209
SQL D ATABASE S CRIPT D EFINITIONS
SFVRA Database Tables
LAYER2_ID
A number that indicates the type of layer 2 protocol to negotiate with this user.
ETHERNET_ADDR
The Ethernet address of the User. Note that this value is only valid if AUTHENTICATION_ID
indicates CPP authentication.
ENABLE_COMPRESSION
Indicates if compression is enabled or disabled for the User. A value of TRUE indicates that
compression is enabled, while FALSE means it is disabled. ENABLE_COMPRESSION is not
currently supported.
ENABLE_MLP
Indicates if the Multi-Link Protocol (MLP) is enabled or disabled for the User. A value of TRUE
indicates that MLP is enabled, while FALSE means it is disabled. ENABLE_MLP is not currently
supported.
ENABLE_IP
Indicates if the IP Protocol is enabled or disabled for the User. A value of TRUE indicates that the
IP Protocol is enabled, while FALSE means it is disabled.
ENABLE_BRIDGE
Indicates if the Bridging protocol is enabled or disabled for the User. A value of TRUE indicates that
the Bridging protocol is enabled, while FALSE means it is disabled.
CALL_IP
Indicates if calls can or can not be initiated to this User based on an IP packet. A value of TRUE
indicates that calls can be initiated to the User based on an IP packet, while FALSE means calls can
not be initiated.
CALL_BRIDGE
Indicates if calls can or can not be initiated to this User based on a bridge packet. A value of TRUE
indicates that calls can be initiated to the User based on a bridge packet, while FALSE means calls
can not be initiated.
CALL_OUT
CALL_OUT is not currently supported.
CALL_BACK
CALL_BACK is not currently supported.
INIT_BANDWIDTH
A number that represents the bandwidth to be instigated whenever a CyberSWITCH initiates a call
to the User.
ID Layer 2 Protocol
0 Point to Point Protocol (PPP)
1 Combinet Proprietary Protocol (CPP)