User`s guide

ManualsBrandsCabletron Systems ManualsComputer equipmentCyberSWITCH CSX150

201

202

203

204

205

206

207

208

209

210

USER’S GUIDE

210 SFVRA Connection Manager

MAX_BANDWIDTH

A number that represents the maximum bandwidth that will ever be allowed to the User.

CONNECTYPE_ID

A number that references the CONNECTTYPE_ID in the USER_CONNECTTYPES table that

indicates what type of connection to make with the User.

BASE_DATARATE

A number indicating the base data rate of connections for the User.

TOD_NOT_BEFORE

The number of minutes since midnight before which a User is not allowed connections. Note that

this is only valid if NO_RESTRICTIONS is set to FALSE.

TOD_NOT_AFTER

The number of minutes since midnight after which a User is not allowed connections. Note that this

is only valid if NO_RESTRICTIONS is set to FALSE.

NO_RESTRICTIONS

Indicates if call restrictions are enabled or disabled. A value of TRUE indicates that no call

restrictions are enabled, while FALSE means they are disabled. If the value is FALSE, the following

fields are used: MINUTES_IN_CALL, MINUTES_IN_DAY, MINUTES_IN_MONTH,

MINUTES_OUT_CALL, MINUTES_OUT_DAY, MINUTES_OUT_MONTH, TOD_NOT_BEFORE,

and TOD_NOT_AFTER

ASSIGN_IP_ADDR

Indicates if the user should be assigned an IP address from the CyberSWITCH or not. A value of

TRUE indicates that the User does require that an IP address be assigned, while FALSE means that

the User does not need an address.

CHECK_CLID

Indicates if a call with the User will include CLID security. A value of TRUE indicates that a call

from this user will require CLID security, while FALSE means it does not.

SUB_ADDRESS

The sub address of the telephone number for the User.

COMPRESSION_SEED

A number that represents the starting PPP STAC-LZS Sequence Number.

ENABLE_IPX

Indicates if the IPX Protocol is enabled or disabled for the User. A value of TRUE indicates that the

IPX Protocol is enabled, while FALSE means it is disabled.

CALL_IPX

Indicates if calls can or can not be initiated to this User based on an IPX packet. A value of TRUE

indicates that calls can be initiated to the User based on an IPX packet, while FALSE means calls

can not be initiated.