User`s guide

USER’S GUIDE
212 SFVRA Connection Manager
SPOOF_IPX_MESSAGE_PACKET
Indicates how a CyberSWITCH should handle Message Waiting packets, which are sent by servers
to attached clients to inform them that the server has a message to send to them. Refer to the packet
handling options table above to translate the packet handling codes.
DM_BEARER
Describes the bearer capabilities for the User’s modem. Refer to the modem bearer capabilities table
below to translate the bearer codes. Note that this is only valid when CONNECTTPE_ID is set to 3
(Digital Modem).
DM_BAUD_RATE
Defines the baud rate for the User’s modem. Currently, the only setting is 0 (Auto). Note that this
is only valid when CONNECTTYPE_ID is set to 3 (Digital Modem).
H0_SUPPORT
Indicates if H0 Call Support is enabled or disabled for the User. A value of TRUE indicates that H0
Call Support is enabled, while FALSE means it is disabled.
IP_FILTER_IN
A string that defines an IP Input Filter, which monitors packets that this User sends into SFVRA-
CONN’s local subnet.
IP_FILTER_OUT
A string that defines an IP Output Filter, which monitors packets that this User receives out from
the SFVRA-CONN’s local subnet.
IPX_WAN
Indicates if the IPXWAN Protocol is enabled or disabled for the User. A value of TRUE indicates
that the IPXWAN Protocol is enabled, while FALSE means it is disabled.
IPX_ROUTING_PROTOCOL
Defines the IPX Routing Protocol for the User. Refer to the IPX Routing Protocol options table
below to translate the routing protocol codes.
Code Modem Bearer Capabilities
0 Speech
10 hex 3.1 kHz Audio
Code IPX Routing Protocol Options
1 None
2 RIP/SAP
3 Triggered RIP/SAP