User`s guide

SFVRA Connection Manager 213
SQL D ATABASE S CRIPT D EFINITIONS
SFVRA Database Tables
IPX_TRIGGER_TYPE
Defines the WAN Peer type for the User. Refer to the WAN Peer Type options table below to
translate the peer type codes.
IPX_NETWORK_NUMBER
A decimal number that represents the hexadecimal IPX Remote LAN Network Number for the
User.
GROUP_ID
A number matching in the G
ROUPS table to which the User belongs. Zero (0) implies that the User
belongs to multiple groups and those entries can be found in the USER_GROUPS table.
ENABLE_ATALK
Indicates if the AppleTalk Protocol is enabled or disabled for the User. A value of TRUE indicates
that the AppleTalk Protocol is enabled, while FALSE means it is disabled.
CALL_ATALK
Indicates if calls can or can not be initiated to this User based on an AppleTalk packet. A value of
TRUE indicates that calls can be initiated to the User based on an AppleTalk packet, while FALSE
means calls can not be initiated.
ATALK_ROUTING_PROTOCOL
Defines the AppleTalk Routing Protocol for the User. Refer to the AppleTalk Routing Protocol
options table below to translate the peer type codes.
ATALK_NODE
A number that represents the AppleTalk Address Node ID for the User.
ATALK_NET
A number that represents the AppleTalk Address Network Number for the User.
ENABLE_CALLBACK
Indicates if the Callback feature is enabled or disabled for the User. A value of TRUE indicates that
the Callback feature is enabled, while FALSE means it is disabled.
ENABLE_USER_AUTH
Indicates if User level Authentication is enabled or disabled for the User. A value of TRUE indicates
that User level Authentication is enabled, while FALSE means it is disabled.
Code WAN Peer Type Options
0 Passive
1 Active
Code AppleTalk Routing Protocol Options
0 None
1 RTMP