Installation guide

Rackmount Installation
CSX200 Installation Guide 4-9
Figure 4-6 Attaching the Strain-Relief Bracket
Attaching the Rackmount Brackets
Refer to Figure 4-7, below, and proceed as follows to attach the rackmount brackets:
• Locate the four 8-32 x 1/4-inch screws and the two rackmount brackets in the
CSX200-ACCY-KIT package.
• Using the four 8-32 x 1/4-inch screws, attach the rackmount brackets to the bottom of the
CSX200 as shown in Figure 4-7, below.
Figure 4-7 Installing the Rackmount Brackets
2012_08
Screws (4)
Rackmount
Brackets (2)
2012_09