User`s guide

CSX200 Configuration with QuickSET

CSX200 Family User’s Guide 87

Compression & Congestion Window

The Compression & Congestion window shown in Figure 44 displays after you click on the

Adv

anced Configuration pull-down menu and select Compression & Congestion at the top of

any QuickSET conﬁguration window.

Figure 44 Compression & Congestion Window

The Compression and Congestion window allows you to enable data compression on each

interface. Data compression allows the size of the data being sent on a WAN link to be minimized,

making the WAN link more efﬁcient. To use data compression, the CSX200 must ﬁrst be fully

conﬁgured and connected to a live WAN link, and compression must be conﬁgured on any remote

WAN device(s). Using software compression, the CSX200 supports up to four DS0s (256 Kbps)

per WPIM. With the optional hardware compression module installed, the CSX200 supports data

compression on all DS0s, which is equivalent to two full T1 lines. For more information on the

hardware data compression module (CSX-200 COMP/ENCR) refer to Chapter 2,