User`s guide

General Configuration Using Local Management
106 CSX200 Family User’s Guide
SNMP Community Names Screen
This section explains how to assign community names. Community names allow you to control
Local Management access by establishing three passwords. Each password controls varying levels
of access to CSX200 Local Management. Figure 51 shows the SNMP Community Names screen.
Figure 51 SNMP Community Names Screen
Community Name Access Policy
To perform any operations on the SNMP Community Names screen, you must have used the
super-user community name at the User Password prompt when initiating the Local Management
session. The default community name for each access level is public or press ENTER.
The following defines each of the SNMP Community Names screen fields:
Community Name — Displays the user-defined names through which a user accesses the
CSX200 Local Management. Any community name entered here acts as a password to Local
Management.
read-only — This access level allows reading of device parameters not including community
names.
SNMP COMMUNITY NAMES
Community Name
public
public
public
Access Policy
read-only
read-write
super-user
SAVE RETURN
CSX 200 Local Management
Flash Image Version: XX.XX.XX