User`s guide

General Configuration Using Local Management
108 CSX200 Family User’s Guide
SNMP Traps Screen
The SNMP Traps screen allows the user to configure the CSX200 to send traps to as many as eight
remote management workstations. SNMP traps are messages about network events and device
operational statistics.
Access the SNMP Traps screen from the Setup Menu screen by using the arrow keys to highlight
the SNMP Traps menu item and pressing ENTER. The SNMP Traps screen, shown in Figure 52,
displays.
Figure 52 SNMP Traps Screen
Trap Table Screen Fields
The following definitions explain each of the SNMP Traps screen fields:
Trap Destination — Use this field to enter the IP address of the management workstation
designated to receive SNMP traps from the CSX200.
Trap Community Name — Use this field to enter the community name of the management
workstation with the associated IP address. The community name indicates the “access level” of
traps that will be forwarded to the Trap destination.
SNMP TRAPS
Trap Community NameTrap Destination Enable Traps
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
public
public
public
public
public
public
public
public
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
SAVE
RETURN
2012_06
0.0.0.0
CSX 200 Local Management
Flash Image Version: XX.XX.XX