User`s guide

General Configuration Using Local Management
CSX200 Family User’s Guide 117
IP Configuration Screen
The IP Configuration screen enables you to access the IP General Config and IP RIP screens to
configure the CSX200 for IP Routing and enable RIP on the CSX200.
Access the IP Configuration screen, shown in Figure 56, by using the arrow keys to highlight the
IP menu item on the Router Setup screen and pressing ENTER. The IP Configuration screen
displays.
Figure 56 IP Configuration Screen
IP Configuration Screen Fields
The following list describes each of the Router Setup Screen fields.
IP General Config — Use this field to access the IP General Config screen and configure the
CSX200 for IP routing.
IP RIP — Use this field to access the IP RIP screen and enable Routing Information Protocol
(RIP) routing on the CSX200.
IP CONFIGURATION
IP General Config
IP RIP
RETURN
2012_09
CSX 200 Local Management Flash Image Version XX.XX.XX