User`s guide

CSX200 Family User’s Guide 37

CSX200 Conﬁguration with

QuickSET

This chapter provides step-by-step instructions for conﬁguring the CSX200 using QuickSET.

Normally, QuickSET automatically establishes a communication link with the CSX200 being

conﬁgured. However, under certain circumstances, QuickSET may not be able to locate the

CSX200 automatically. In this case, the IP Address window shown in Figure 12 displays.

Figure 12 IP Address Window

Enter the IP address of the CSX200 in the appropriate ﬁeld and the password if applicable (the

default password is public). Click on the O

K button and QuickSET locates the CSX200 on the

network and displays the First Introductory window shown in Figure 13.

NOTE

Before conﬁguring the device, you must set up your computer based on the

READ ME

FIRST!

documentation included with the product and installed the CSX200 based on

the

QuickSTART

Guide located in the

QuickSET

CD case.

The CSX200 must have a WPIM installed before you can begin conﬁguring the device.

NOTE

The

QuickSET

version number shown on each window in this chapter may not be the

version number of

QuickSET

running on your system.