Setup guide

MMAC-M8FNB SETUP
Page 3-3
Figure 3-1. Installing the M8FNB into a Rack
7. Align the slots on each mounting bracket with the desired holes on
the equipment rack.
8. Insert a bolt (item 5) through the slot in each of the mounting
brackets and into the threaded holes in the equipment rack (item
6). Secure bolts with locking washers.
9. Tighten the nuts and bolts until the unit is secured to the rack.
MMAC-M8FNB
The Complete Networking Solution™
Multi Media Access Center
1
4
3
2
6
5
1. Screws (8 total; 4 each side)
2. Rack mount bracket
3. Holes for flush mount
4. Holes for recessed mount
5. Bolts (secure with locking washers)
6. Equipment Rack