Setup guide

MMAC-M8FNB SETUP
Page 3-9
3.2.5 Installing the Security Bars
The MMAC-M8FNB is equipped with security bars to prevent
unauthorized access to the hub and its installed modules. Two security
bars have been provided: one to cover the top row of knurled knobs
securing the modules to the chassis, and one to cover the bottom row
of knobs.
To attach the security bars to the chassis:
1. Install all MIMs in the M8FNB hub, as desired; be sure to install
panels over any empty slots.
2. Place one of the security bars across the top row of knurled knobs
securing the modules and panels to the chassis; align the screws in
the security bar with the holes in the chassis (as illustrated in
Figure 3-5), and tighten the screws. Repeat the procedure with the
second security bar, using it to cover the bottom row of knurled
knobs.