EMM-E6 Ethernet User's Guide

EMM-E6 User’s Guide 7-1
CHAPTER 7
CONFIGURATION SCREEN
In the EMM-E6 Configuration Screen you can assign an IP address and
Subnet Mask to the EMM-E6. You can also:
• set the Default Interface
• set the Default Gateway
• override locked ports
• enable all ports.
7.1 ACCESSING THE CONFIGURATION SCREEN
To access the Configuration Screen:
1. From the Features Selection Screen, use the arrow keys to highlight the
IP Address Assignment option, and press the Return key. The
Configuration Screen, Figure 7-1, appears.
Figure 7-1. Configuration Screen
EMM-E6-960 LOCAL MANAGEMENT
Cabletron EMM-E6 Revision 0.00.00
CONFIGURATION
COM 1 Application: UPS Baud Rate: 2400 --ACTIVE--
COM 2 Application: CONSOLE Baud Rate: 9600 --ACTIVE--
Port Lock Override: OVERRIDE DISABLED
Port Enable Override: OVERRIDE DISABLED
Default Interface: NONE Default Gateway: -NONE DEFINED-
SAVE IPs COMMUNITY NAMES TRAP TABLE SNMP TOOLS CLI RETURN
F6 F7 F8 F9 F10
I/F
1
2
3
4
5
CHANNEL
A
B
C
D
E
IP ADDRESS
134.204.12.91
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SubNET MASK
255.255.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
MAC ADDRESS
00-00-1D-07-50-0E
00-00-1D-07-50-0F
00-00-1D-07-50-10
00-00-1D-07-50-11
00-00-1D-07-50-12
CH1Book Page 1 Wednesday, March 20, 1996 7:48 AM