EMM-E6 Ethernet User's Guide

DEVICE STATISTICS SCREEN COMMANDS
EMM-E6 User’s Guide 11-3
RUNT PACKETS
Displays the number of runt packets received from the network. A
runt packet is less than the minimum Ethernet frame size of 64 bytes,
not including preamble.
GIANT PACKETS
Displays the number of giant packets receivedfrom the network. A
giant packet is greater than the maximum Ethernet frame size of 1518
bytes, not including preamble.
PORT ADMIN. STATUS
Displays the administrative status of the port selected. The two
possible status messages are Enable or Disable.
PORT SEG. STATUS
Displays the segmentation status of the port selected. The two
possible status messages are Segmented or Unsegmented. The
EMM-E6 automatically partitions problem ports or interfaces (those
having 32 consecutive collisions, and re-connects non-problem
segments to the network.
11.2 DEVICE STATISTICS SCREEN COMMANDS
The Device Statistics screen provides several commands that allow you to
access and manipulate various boards and ports. This section first gives a
brief description of each command, and then explains how to use them.
ENABLE PORT
This command lets you enable the selected port.
DISABLE PORT
This command lets you Disable the selected port.
UPDATE-FREQ
This command lets you select the time interval between Network/
Slot/Port counter updates. You can choose update intervals in
increments of 3 seconds, with the maximum interval being 99
seconds.
CH1Book Page 3 Wednesday, March 20, 1996 7:48 AM