EMM-E6 Ethernet User's Guide

CHAPTER 11: DEVICE STATISTICS SCREEN
11-4 EMM-E6 User’s Guide
NETWORK
This command lets you select the network you want to monitor. The
choices range from A to F, depending on the configuration of your
network and the options available from this configuration. For
example, if you do not have a Media Interface Module running on the
A Channel, the EMM-E6 automatically disallows Channel A as a
network selection.
SLOT
This command lets you select the MMAC hub slot that you want to
monitor. The choices vary depending on the MMAC chassis you use.
The far right slot is always slot number one (1).
PORT
This command lets you select and view port statistics for ports 1
through 26 of the device residing in the selected Slot.
11.2.1 Selecting an Update Frequency
The EMM-E6 updates the Device Statistics screen every three seconds by
default. The EMM-E6 allows you to adjust this frequency in intervals of
three seconds (maximum frequency is 99 seconds).
To adjust the UPDATE-FREQ:
1. Use the arrow keys to highlight the UPDATE-FREQ command.
2. Press the Shift and + keys together, or just the - key until the desired
time/frequency appears (this number increments/decrements in 3
second intervals; minimum = 3 seconds; maximum = 99 seconds).
3. Press the Return key to set and save the changes to the
UPDATE-FREQ field.
CH1Book Page 4 Wednesday, March 20, 1996 7:48 AM