EMM-E6 Ethernet User's Guide

CHAPTER 13: MIB NAVIGATOR
13-4 EMM-E6 User’s Guide
• To abort the output or interrupt a process the escape character is ^C
(where ^ equals the Control key).
• A slash (/) proceeding an OID issues that command from the root
directory regardless of where you are in the MIB. If no slash
precedes the OID the command issues from your current MIB
location.
• Dot notation (1.1.1.1) is equivalent to slash notation (1/1/1/1). Use
slash notation with the navigational commands, and the dot notation
with the built-in commands that are using SNMP to access and
manage network devices.
13.3.2 Navigation Commands
The following provides a brief description, the proper format, and an
example of each Navigation command.
branch
The branch command displays all of the leaves in the MIB
tree below a specified path. The information displayed
includes the path name, the object ASCII name, the type of
object (i.e., integer, counter, time tick, etc.), and the current
value.
Format:branch [PATH]
Example MIBNav> branch /1/3/6/1/2/17
#/1/3/6/1/2/1/7/1 udpInDatagrams COUNTER 38216
#/1/3/6/1/2/1/7/2 udpNoPorts COUNTER 0
#/1/3/6/1/2/1/7/3 udplnErrors COUNTER 0
CH1Book Page 4 Wednesday, March 20, 1996 7:48 AM