EMM-E6 Ethernet User's Guide

MIB NAVIGATOR COMMAND SET OVERVIEW
EMM-E6 User’s Guide 13-9
Navigation Commands (cont’d)
su
The su command enables you to change your community
name to allow for different access to the MIB. The
community name that you enter allows you either Basic
Read, Read Only, Read/Write, or Super-User access to that
device’s MIBs, depending on the level of security access
assigned the password through the Local Management
Community Table. Refer to Chapter 6 on how to establish a
community name password.
Format: su [COMMUNITYNAME]
Example MIBNav> su public
tree
The tree command provides a display of the entire MIB for
the device. Leaves and associated values are displayed in
columns.
Format: tree
Example MIBNav> tree
# /1/3/6/1/2/1/1/1 sysDescr STRING EMRev X.X.X.X
# /1/3/6/1/2/1/1/2 sysObjectId OBJECT ID 1.3.6.1.4.1.52
# /1/3/6/1/2/1/1/3 sysUpTime TIME TICKS 8098654
# /1/3/6/1/2/1/1/4 sysContact STRING AlZwieback/MIS
# /1/3/6/1/2/1/1/5 sysName STRING TrngEMME2
# /1/3/6/1/2/1/1/6 sysLocation STRING 1st Floor Closet
# /1/3/6/1/2/1/1/7 sysServices INTEGER 1
CH1Book Page 9 Wednesday, March 20, 1996 7:48 AM