EMM-E6 Ethernet User's Guide

CHAPTER 1: INTRODUCTION
1-2 EMM-E6 User’s Guide
Chapter 5, Accessing Local Management , describes how to access LM
after you attach the management console.
Chapter 6,
Community Names , explains how to use the Community
Name Table screen to set both local and remote access levels.
Chapter 7,
Configuration Screen , describes how to assign IP addresses,
subnet masks, and the default gateway to the EMM-E6. This chapter also
explains how to enable and disable all ports.
Chapter 8,
Trap Table Screen , explains how to designate management
stations as recipients of SNMP alarm or event traps.
Chapter 9,
SNMP Tools Screen , provides information on the resident
EMM-E6 Management Information Base (MIB) walking tool.
Chapter 10,
Router Setup Screen , Shows the Routing Services Setup
Screen, where the EMM-E6’s optional Routing Services may be
accessed.
Chapter 11,
Device Statistics Screen , illustrates the statistics provided by
EMM-E6/LM. This chapter also describes how to enable and disable
specific ports on the EMM-E6, and set the statistics update frequency
time.
Chapter 12,
Command Line Interface Screen , shows the Command
Line Interface (CLI) screen. This screen will function in future releases of
EMM-E6 firmware.
Chapter 13,
MIB Navigator , provides instructions and examples for
using the navigator command set.
Chapter 14,
Troubleshooting , details the EMM-E6 LANVIEW

LEDs
that enable you to quickly diagnose network/operational problems and
provides suggested courses of action for troubleshooting.
Chapter 15,
Image File Download , provides instructions to download a
new image file to the EMM-E6 by setting specific MIB OID strings.
CH1Book Page 2 Wednesday, March 20, 1996 7:48 AM