EMM-E6 Ethernet User's Guide

CHAPTER 13: MIB NAVIGATOR

13-12 EMM-E6 User’s Guide

Built-In Commands (cont’d)

netstat

The netstat provides a display of general network statistics

for the managed device. The netstat command must be

used with one of the following two display options:

-i Displays status and capability information for each

interface.

-r Displays routing information for each interface.

Format netstat -i

netstat -r

Example MIBNav> netstat -i

#Intrfc Description AdmnState OperState MTU Speed

#1 enet-csmacd up up 1514 10000000

#2 enet-csmacd up up 1514 10000000

#3 enet-csmacd up up 1514 10000000

#4 enet-csmacd up up 1514 10000000

Example MIBNav> netstat -r

# Destination Next-Hop Interface

# 122.144.40.0 DirectConnection 4

ping

The ping command generates an outbound ping request to

check the status (alive/not alive) of a device at a speciﬁed IP

address.

Format: ping <IPADDRESS>

Example MIBNav> ping 122.144.40.10

# 122.144.40.10 is alive

CH1Book Page 12 Wednesday, March 20, 1996 7:48 AM