EMM-E6 Ethernet User's Guide

APPENDIX A: EMM-E6 SPECIFICATIONS

A-8 EMM-E6 User’s Guide

Table A-2. EPIM-F3 Statistics

arameter Typical Minimum Maximum

Transmitter Peak

Wave Length:

1300 nm 1270 nm 1330 nm

Spectral Width: 60 nm — 100 nm

Rise Time: 3.0 ns 2.7 ns 5.0 ns

Fall Time: 2.5 ns 2.2 ns 5.0 ns

Duty Cycle: 50.1% 49.6% 50.7%

TX Power: -15.1 dBm

TX Budget: 14.4 dBm

RX Sensitivity: -29.5 dBm

MAX Receive

Power:

-6.99 dBm

Bit Error Rate: Better than 10

-10

The above transmitter power levels and receive sensitivity

levels represent Peak Power Levels after optical overshoot.

You must use a Peak Power Meter to correctly compare the

above values to those you measure on any particular port. If

you measure Power Levels with an Average Power Meter,

you must subtract 3 dBm from the measurement to correctly

compare those measured values to the values listed above

(e.g., -29.5 dBm peak = -32.5 dBm average).

NOTE

CH1Book Page 8 Wednesday, March 20, 1996 7:48 AM