EMM-E6 Ethernet User's Guide

PORT GROUP SECURITY
EMM-E6 User's Guide B-5
rptrPortSecurityDisableOnViolation
Description: Designates whether port is disabled if source address
is violated. A source address violation occurs when an address is
detected which is not in the source address list for this port. If this
port is disabled for this port address violation it can be enabled by
setting rptrPortMgmtAdminState. Default state is enabled (2).
Object Identifier: 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6
Data Type: Integer
Values: 1 disable
2 enable
Access Policy: read-write
rptrPortSecurityFullSecEnabled
Description: A port that is set to full security and is locked will
scramble all packets, which are not contained in the expected
source address list, including broadcasts and multicasts. A port
that is set to partial security will allow broadcast and multicasts to
repeat unscrambled. Default state disabled (1).
Object Identifier: 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7
Data Type: Integer
Values: 1 disable
2 enable
Access Policy: read-write
CH1Book Page 5 Wednesday, March 20, 1996 7:48 AM