EMM-E6 Ethernet User's Guide

APPENDIX B: COMMONLY-USED OIDs
B - 8 EMM-E6 User's Guide
rptrPortGrpHwTrapSetSeg
Description: Enables and disables segmentation traps for the
specified port group at the board level.
Object Identifier: 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3.<b#>
Data Type: Integer
Values: 1 disable
2 enable
Access Policy: read-write
rptrPortGrpSaTrapSetSrcaddr
Description: Enables and disables segmentation traps for the
specified port group at the board level.
Object Identifier: 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.2.<b#>
Data Type: Integer
Values: 1 disable
2 enable
Access Policy: read-write
B.4.3 Enabling Port Level SNMP Traps
The next three OIDs are for traps enable and disable at the port level. The
<b#> value is the number of the module in the MMAC chassis to be
examined. This number will be based on the location of the module in the
chassis. For detailed descriptions of the location numbering scheme in
your MMAC chassis, please refer to your MMAC User’s Guide.
Likewise, the <p#> value is the assigned number of the individual port on
that module which SNMP Traps will be enabled or disabled for. Port
numbers may be determined by examining the faceplate of the module,
where they are clearly printed.
CH1Book Page 8 Wednesday, March 20, 1996 7:48 AM