EMM-E6 Ethernet User's Guide

EMM-E6 QUICK REFERENCE CARD
EMM-E6 QUICK REFERENCE CARD
LED DESCRIPTION
CPU
Flashing Green: Board Operating
Properly.
Red: CPU error condition.
STBY
A, B, C, D
Amber indicates port or interface
placed in standby state.
RCV
A, B, C, D
Green indicates valid link from station
to EMM-E6 interface.
Amber indicates segment receiving
traffic.
XMT
A, B, C, D
Green indicates segment is
transmitting traffic.
Flashing red indicates port in standby
due to spanning tree operation.
CLN
A, B, C, D
Red indicates collision detected on
segment. Occasional activation of CLN
LED is normal.
Switch Function
1 Cabletron Systems Use Only. Must be in OFF position.
2 Cabletron Systems Use Only. Must be in OFF position.
3 Cabletron Systems Use Only. Must be in OFF position.
4
MIMREV. Should be OFF unless THN-MIM s with part numbers below
9000043-05 are located in the MMAC.
5
Baud Rate Default. Sets local management console port baud rate. OFF
(default) = 9600 Baud, ON = 2400 baud.
6
Forced Download. When toggled, forces image files to be loaded from
BOOTP server by clearing information from NVRAM.
7
NVRAM Reset. When toggled, deletes user parameters stored in NVRAM
and returns these parameters to factory default settings.
8
Password Default. When toggled, deletes user defined passwords stored
in NVRAM and returns these passwords to factory default settings (public
or [Return]).
EMM-E6
STBY
RCV
XMT
CLN
D C B A
CPU
RESET
SN
BRIM-A100
SWITCH SETTINGS
LANVIEW LEDs
CH1Book Page 5 Wednesday, March 20, 1996 7:48 AM