EMM-E6 Ethernet User's Guide

CHAPTER 3: INSTALLATION
3-26 EMM-E6 User’s Guide
Figure 3-14. The EPIM-C
Attach thin-net segment directly to BNC
connector when internal termination
switch is set to on ( ).
When internal termination switch
is set to off ( ):
Connect BNC T-connector to port.
Attach a terminator or terminated
thin-net segment to one female
connector of tee-connector.
Connect a terminated thin-net
segment to other female connector
of T-connector.
CH1Book Page 26 Wednesday, March 20, 1996 7:48 AM