Specifications

9030981 E5 Configuration View
3-3
ETSMIM Device Configuration View
Resource and Feature Configuration View
Dump Address
The IP address of the node that received the last terminal server memory
dump.
Resources
The number of times a local resource allocation failed, for example, due to lack
of dynamic memory.
Features
The number of feature entries in the Feature table.
SW Type
The software version variant running in the terminal server.
SW Rev
The software version running in the terminal server. In order, the octets
contain major version, minor version, ECO, and pre-release number.
HW Type
The hardware type on which the terminal server is running.
HW Rev
The hardware version on which the terminal server is running.
ROM Rev
The firmware version of the bootstrap ROM installed in the terminal server.
Chassis Type (Mx45xx)
The type of chassis in which the terminal server is running.
Ethernet Interfaces
A unique value for each interface.
Serial Ports
The number of basic character serial ports available.
Resource and Feature Configuration View
You access this view by clicking on the Resource & Feature Detail Button in
the ETSMIM Configuration view. This view contains entries in a Resource
Utilization panel and a Features panel. To modify the maximum allowed
usage, double-click on any entry in the Resource Utilization panel and the
Resource Utilization Detail view appears with detailed information for the
selected resource. To alter the status of a feature, double-click on any entry in
the Features panel and the Feature Detail view appears with the same
information in a modifiable format for the selected feature. Fields for both
detail views are presented below.