SmartSwitch 9000 9F120-08 / 9F122-12 / 9F125-08 Local Management Appendix 9031372-01
Appendix 9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Introduction This appendix contains local management information that is specific to the 9F120-08, 9F122-12 and 9F125-08 MicroLAN modules. Default Interface Codes The Default Interface field on the General Configuration Screen allows you to enter a number (one through three). Each number represents a default interface for the selected module.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information FNB Resource Configuration Codes All of the MicroLAN Modules described in this appendix physically attach to the FNB-1 and the FNB-2 on the SmartSwitch 9000 backplane. By default, the module inserts into four rings (the primary and secondary rings of the FNB-1 and the FNB-2). The FNB Resource Configuration Screen allows you to customize this configuration to your particular needs.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Table 2. 9F12x-xx MicroLAN Module FNB Resource Configuration Codes Configuration ID 1 2 3 4 5 6 FDDI Connections Description FNB 1 Pri. (MAC) Byp. , FNB 2 Pri. (No MAC) Byp. The module is attached, but not inserted, to the primary ring on the FNB-1. The module is attached, but not inserted, to the primary ring on the FNB-2. The MAC resides on FNB-1. FNB 1 Pri. (MAC) Byp. , FNB 2 Pri. (No MAC) Ins.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Table 2. 9F12x-xx MicroLAN Module FNB Resource Configuration Codes (Continued) Configuration ID 7 8 9 10 11 12 4 FDDI Connections Description FNB 1 Pri. (No MAC) Ins. , FNB 2 Pri. (MAC) Byp. The module is attached to the FNB-1 primary ring and the FNB-2 primary ring. The switch that inserts the module into the FNB-1 is turned on. The switch that inserts the module into the FNB-2 is turned off. The MAC resides on FNB-2. FNB 1 Pri.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Table 2. 9F12x-xx MicroLAN Module FNB Resource Configuration Codes (Continued) Configuration ID 13 14 15 16 17 18 FDDI Connections Description FNB 1 Pri. (No MAC) Byp. , FNB 2 Sec. (MAC) Byp. The module is attached to the FNB-1 primary ring and the FNB-2 secondary ring. The switch that inserts the module into the FNB-1 is turned off. The switch that inserts the module into the FNB-2 is turned off. The MAC resides on FNB-2. FNB 1 Pri.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Table 2. 9F12x-xx MicroLAN Module FNB Resource Configuration Codes (Continued) Configuration ID 19 20 21 22 23 24 6 FDDI Connections Description FNB 1 Sec. (MAC) Ins. , FNB 2 Pri. (No MAC) Byp. The module is attached to the FNB-1 secondary ring and the FNB-2 primary ring. The switch that inserts the module into the FNB-1 is turned on. The switch that inserts the module into the FNB-2 is turned off. The MAC resides on FNB-1. FNB 1 Sec.
F120-08 / 9F122-12 / 9F125-08 Module Specific Information Table 2. 9F12x-xx MicroLAN Module FNB Resource Configuration Codes (Continued) Configuration ID 25 26 27 28 29 30 FDDI Connections Description FNB 1 Sec. (MAC) Byp. , FNB 2 Sec. (No MAC) Byp. The module is attached to the FNB-1 secondary ring and the FNB-2 secondary ring. The switch that inserts the module into the FNB-1 is turned off. The switch that inserts the module into the FNB-2 is turned off. The MAC resides on FNB-1. FNB 1 Sec.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Table 2. 9F12x-xx MicroLAN Module FNB Resource Configuration Codes (Continued) Configuration ID 31 32 8 FDDI Connections Description FNB 1 Sec. (No MAC) Ins. , FNB 2 Sec. (MAC) Byp. The module is attached to the FNB-1 secondary ring and the FNB-2 secondary ring. The switch that inserts the module into the FNB-1 is turned on. The switch that inserts the module into the FNB-2 is turned off. The MAC resides on FNB-2. FNB 1 Sec. (No MAC) Ins.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information Module Specific Configuration Screen In the FNB Resource Configuration Screen, you determine which of the two FNB rings contains the MAC. The 9F120 MicroLAN Module Specific Configuration Screen allows you to assign one of the two FNB rings (either the ring that contains the MAC or the ring that does not contain the MAC) to each of the module’s Mports.
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information 10
