User guide

Chapter 3: Configuring the FN100
Page 3-18 Fast Network 100 User Guide
3.14.2 System Name
The system name is a name assigned to the FN100 by the network
administrator. By convention, the system name is the fully qualified
domain name. (This name then becomes the LCM prompt.)
sysName - {system 5}
DisplayString (SIZE (0..255))
3.14.3 System Location
The system location identifies the physical location of the FN100.
sysLocation - {system 6}
DisplayString (SIZE (0..255))
3.14.4 Authentication Password
The set password and get password variables (from the proprietary MIB),
must be initialized with the correct authentication passwords.
All requests from any SNMP manager contain a community name field.
For set requests, the community name must match the set password;
otherwise, the request will be rejected by the FN100. For get requests, the
community name must match either the set password or the get password.
3.14.4.1Set Password
The set password variable (sfadminAnyPass) must be set to the value of
the community name used by the SNMP manager for performing either
set or get operations. A zero length password means that any community
name is acceptable.
sfadminAnyPass - {sfadmin 2}
DisplayString (SIZE (0..24))