User guide

Using LCM to Check FN100 Status
Fast Network 100 User Guide Page 4-5
• The number of SNMP PDUs received with an authentication failure.
[
snmpInBadCommunityUses]
• The number of SNMP PDUs received with an ASN.1 parsing error
while being decoded. [snmpInASNParseErrs]
• The total number of MIB objects which have been successfully
retrieved as a result of SNMP GetRequest or GetNext PDUs.
[
snmpInTotalReqVars]
• The total number of MIB objects which have been successfully altered
as a result of SNMP SetRequest PDUs. [snmpInTotalSetVars]
• The total number of SNMP GetRequest PDUs received and processed
with no errors. [snmpInGetRequests]
• The total number of SNMP GetNext PDUs received and processed
with no errors. [snmpInGetNexts]
• The total number of SNMP SetRequest PDUs received and processed
with no errors. [snmpInSetRequests]
• The total number of SNMP PDUs created with a value of
tooBig in the
PDU’s
ErrorStatus. [snmpOutTooBigs]
• The total number of SNMP PDUs created with a value of
noSuchName
in the PDU’s
ErrorStatus. [snmpOutNoSuchNames]
• The total number of SNMP PDUs created with a value of
badValue in
the PDU’s
ErrorStatus. [snmpOutBadValues]
• The total number of SNMP PDUs created with a value of
genErr in the
PDU’s
ErrorStatus. [snmpOutGenErrs]
• The total number of SNMP GetResponse PDUs created.
[snmpOutGetResponses]
• The total number of SNMP Trap PDUs created. [
snmpOutTraps]
4.3 USING LCM TO CHECK FN100 STATUS
The LCM commands that enable you to quickly check on the status of the
FN100 include:
• Status