User guide

Chapter 4: Monitoring and Managing the FN100
Page 4-6 Fast Network 100 User Guide
• Address display
• Ipaddr
• Ident
These LCM commands are described in the sections that follow.
4.3.1 Displaying Status
Use the status command to display the status of the FN100 and
automatically page through the status of all of the Ethernet ports, pausing
at each information screen.
For example, to display status information for all FN100 ports:
FN100 > status
LCM displays:
Software Currently Running: FN100
Mon 11/13/95 09:01:21
Next Bootstrap (2nd bank) : FN100
Mon 11/13/95 09:01:21
Power-up test failures:
none
Current unit temperature is normal.
System Up Time: 2 days, 18:48:18
Current Number of Learned Addresses:
Virtual Switch 1: 0
Virtual Switch 2: 0
Type <Return> to continue the display ... >
Press the Return key to display additional status information.
NOTE
You can also use the status command to display status for
individual Ethernet ports by typing status and specifying a port
number.