User guide

Troubleshooting
Fast Network 100 User Guide Page 5-7
5.4.4 FN100 Has Rebooted
• Use the LCM ident command to check the FN100 diagnostic codes,
and call Cabletron Systems Technical Support.
5.4.5 FN100 Does Not Respond to NMS
• Check the port status using LCM.
• Check to see if the Spanning Tree topology is stable using LCM.
• Check that a pathway to the FN100 exists.
• Verify the FN100 IP address using LCM.
• Verify the FN100 routing table using LCM.
• If problems persist, contact Cabletron Systems Technical Support.