User guide

Fast Network 100 User Guide Page A-1
APPENDIX A
TECHNICAL SPECIFICATIONS
A.1 FN100 SPECIFICATIONS
Physical
Height 3.5 in. (8.89 cm)
Width 17 in. (43.18 cm)
Depth 17.5 in. (44.45 cm)
Weight 10 lb. (4.54 kg)
Installation options Tabletop or rack-mount
Electrical
Input voltage Auto-ranging 100-120 VAC,
200-240 VAC
Frequency 50/60 Hz
AC power consumption Less than 200 watts
Connector Ports
• 10BASE-T: RJ45 (MDI-X) using UTP cable, EIA/TIA Cat. 3, 4, 5
• 100BASE-TX: RJ45 (MDI-X) using UTP cable, EIA/TIA Cat. 5
• 100BASE-FX: ST connectors using 62.3/125 µ multimode fiber optics
• 1 RS232C D-type, 9-pin female out-of-band port supporting direct
VT-100-type terminal connection and remote connection via PPP
Environmental
Operating temperature 5° to +40°C (41° to +104°F)
Relative humidity 0% to 95%, non-condensing
Diagnostic LEDs
Individual port link status (8, 16)
Individual port segment status (8, 16)
Port Status Mode (6), specifying:
• Transmit activity • Receive activity
• Collision • 100 Mbps operation
• Transmit or receive activity • User-defined
Ready (1)
Power (Pwr) (1)