User`s guide

A-3
Removing an Entire Trunk Group
Removing an Entire Trunk Group
To remove an entire trunk Group:
1. Using the arrow keys, highlight the Group: [ADD/DELETE] Þeld (on the
same line as the Add/Remove Group Þeld). Press the Spacebar to select
[DELETE].
2. If the name of the group to be deleted doesnÕt appear on the Add/Remove
Group Þeld, type the name of the SmartTrunk group you wish to delete.
It is also possible to use the Display Group Þeld to toggle through existing
groups. This will automatically update Add/Remove Group Þeld. Once the
proper name appears in the Add/Remove Group Þeld, highlight the SAVE
command, and then press the Return key. The group will be removed.
Removing a Port from a Group
To remove a port form a Group:
1. Select the group to have a port removed. If the name of the group to be
deleted doesnÕt appear on the Add/Remove Group Þeld, type the name of the
SmartTrunk group you wish reconÞgure. It is also possible to use the Display
Group Þeld to toggle through existing groups. This will automatically update
the Add/Remove Group Þeld. Once the proper name appears in the
Add/Remove Group Þeld, proceed to step 2.
2. Highlight the [ADD/DELETE] Þeld (to the right of the Port Þeld). Press the
Spacebar to select [DELETE].
3. Move the cursor to the Port Þeld. Select the port that is to be removed from the
SmartTrunk Group. Press the Spacebar to change the port number. Only ports
that are currently members of the group will be displayed.
4. Once the port is selected, highlight the [DELETE] Þeld.
5. To delete the port, press the Return key.
6. Continue to press the Return key and all ports will be deleted.
7. Highlight the SAVE command, and then press the Return key.
All ports in the group will be released. It is not necessary to remove ports from a
group before deleting the group.
NOTE