Installation guide

HSIM-W84 Firmware Support
HSIM-W84 Installation Guide 2-15
• Cabletron Enterprise Traps:
• Port Segmented Trap Type Code #257(0x101)rrev4-mib
• Port Operational Trap Type Code #258(0x102)rrev4-mib
• Port Link Up Trap Type Code #259(0x103) rrev4-mib
• Port Link Down Trap Type Code #260(0x106) rrev4-mib
• Environmental Temperature Hot Trap Type Code #282(0x11A) brrev4-mib
• Environmental Temperature Normal Trap Type Code #284(0x11C) rrev4-mib
• IP Event Log Change Trap Type Code #1280(0x500) ctip-mib
The following is a list of IP Events that are logged and that create the IP Event Log Change
Trap.
• IP Routing has been disabled on interface #
• IP Routing has been enabled on interface #
• IP Forwarding has been enabled on interface #
• IP MTU size has been changed on interface #
• IP Framing Type has been changed on interface #
• IP has detected Link UP on interface #
• IP has detected Link DOWN on interface #
• IP Primary address has been changed on interface #
• IP Secondary address has been changed on interface #
• IP Access Control Lists have been enabled on interface #
• IP Access Control Lists have been disabled on interface #
• IP has detected Port UP (WAN devices only)
• IP has detected Port DOWN (WAN devices only)
• IP Proxy ARP has been disabled on interface #
• IP Proxy ARP has been enabled on interface #
• IP RIP has been enabled on interface #
• IP RIP has been disabled on interface #
• IPX Event Log Change TrapType Code #1281(0x501)ctipx-mib
The following is a list of IPX Events that are logged and that create the IPX Event Log
Change Trap.
• IPX Routing has been disabled on interface #
• IPX Routing has been enabled on interface #
• IPX Forwarding has been enabled on interface #