SPECTRUM Software Release Notice (SSRN) For SPECTRUM 6.
Notice Copyright Notice Copyright © 2002-present by Aprisma Management Technologies, Inc. All rights reserved worldwide. Use, duplication, or disclosure by the United States government is subject to the restrictions set forth in DFARS 252.227-7013(c)(1)(ii) and FAR 52.227-19. Liability Disclaimer Aprisma Management Technologies, Inc. (“Aprisma”) reserves the right to make changes in specifications and other information contained in this document without prior notice.
Contents Notice ........................................................................................... 2 Overview ...................................................................................... 7 SPECTRUM 6.6 Feature List .......................................................... 8 AutoDiscovery ........................................................................... 8 Performance ......................................................................... 8 Accuracy ............................
Location Server ........................................................................26 Miscellaneous ...........................................................................27 Management Modules ................................................................28 Dominion Web Reporter .............................................................30 Search Manager ........................................................................31 Security ..........................................................
Packeteer PacketShaper .............................................................55 Nortel Contivity Extranet Switch ..................................................55 Riverstone SmartSwitch Router ...................................................56 SmartSwitch Routers (SSR) ........................................................57 Sun Management Center Agent ...................................................58 SynOptics 5000 Hubs ................................................................
Device MIB Support ..................................................................80 Note to Users ...........................................................................80 Index .......................................................................................... 81 SPECTRUM Software Release Notice (SSRN) For SPECTRUM 6.
Overview A copy of the SPECTRUM Software Release Notice (SSRN) is included on both the SPECTRUM 6.6 Application CD and the SPECTRUM Release 6.6 Documentation CD; it is also available online at http://www.aprisma.com/manuals. The SSRN is intended to alert users to product enhancements or changes, late-breaking information, and corrected and known anomalies. It is strongly recommended that you read the SSRN so you are aware of any changes in the product or the associated documentation.
SPECTRUM 6.6 Feature List This section describes new features included in SPECTRUM 6.6. AutoDiscovery One of the many goals for SPECTRUM 6.6 was to make some iterative changes to the AutoDiscovery application to improve performance, accuracy, and overall usability. This was accomplished after completing an extensive examination of the AutoDiscovery application and reviewing the application’s default settings. Below is a list of all the changes that have been made and a brief description of their impact.
• Reduction in Model Count and Memory Usage: Model count and memory usage were reduced by no longer automatically discovering/ modeling unnecessary EthernetIfApp application models. These may still be generated, if needed, by initiating a manual application rediscovery from a device’s configuration view. Accuracy • Fanout models: Additional intelligence has been added to review fanout placement. Previous releases of SPECTRUM would place a fanout between devices when the connecting device was unmanaged.
• Universe settings: Changes have been made to the default universe settings to provide a cleaner modeling presentation. New Defaults: 1) Create routers in this view only 2) Place LANs in this view only 3) Create LANs. • Loopback and Duplicate IP support: A change was made in SPECTRUM to allow models to exist that have duplicate IP addresses. Some networking technologies such as load balancers create identical IP addresses across a range of devices.
• Database check and backup will now occur prior to completing AutoDiscovery. The check provides the user with a warning if their database is corrupt prior to starting AutoDiscovery and allows them to restore a non-corrupt database. The backup then ensures they have a clean backup available moving forward if there is a problem that occurs during the discovery.
Maintenance Mode • Users can now enable maintenance mode for individual interfaces/ports of a device. Interfaces/ports in maintenance mode behave in the same manner as devices in maintenance mode. No alarms or events will be asserted on the interface/port while in maintenance mode. SPECTRUM will send no SNMP or ICMP communications to the interface/ports while in maintenance mode.
New Management Modules • Nortel Contivity MM: This MM delivers support for Nortel’s Contivity family of VPN switches and provides IP Fault Management visibility. The MM provides support for many RFCs including, but not limited to RFC2737 (Entity MIB), RFC2787 (VRRP MIB), RFC2790 (Host Resources MIB), RFC1850 (OSPF MIB), and RFC1724 (RIP2 MIB). Given the VPN focus of this family of devices, of particular interest is RFC2667 (IP Tunnel MIB).
• Cisco CallManager MM: This MM delivers support for Cisco’s CallManager. The MM provides support for the Cisco CallManager (CCM) MIB. Supported MIB groups include the “ccmTable” (CallManager) MIB group, “ccmGatewayTable” group and the “ccmGatewayTrunkTable” group. These tables provide the user insight into the health of the CallManager as well as information on the gateway connected to the CallManager.
• RFC2667 (IP Tunnel MIB): This RFC provides information pertaining to tunnel protocols that are established over IP. It also provides the public IPs that a tunnel is established over. SPECTRUM will use the information provided on the tunnel such as remote and local IPs, type of tunnel and security, and status of the tunnel. In addition, several other enhancements were made to existing management modules.
Non-Persistent Connection Manager (NPC) • Support for Multilink PPP has been added by allowing a Dialup_Link model to be pasted on more than one interface on a single device model. When the Dialup_Link model is pasted on each of the PPP interfaces which make up the multilink, these interfaces will form a secondary group. A new Dialup_Link model attribute, DevSecGrpActiveCriteria, controls the method used to determine the state of a secondary group, and thus the secondary link.
SPECTRUM Configuration Manager • SPECTRUM Configuration Manager “save as” capabilities have been enhanced to allow the current configuration to be written to a file with the name devicename_config name.txt. This translates to easier archival of configurations. • The risk of a customer router staying in an infinite “wait” state and SPECTRUM Configuration Manager hanging has been removed.
Web Operator Suite • The amount of unused screen real estate and secondary graphics and logos has been reduced to increase the amount of useful data that can be presented on a screen. This reduces the amount of scrolling and the need for the user to “hunt” for data. • The Web Operator Suite home page has been removed and users will now be initially presented with the Alarm Manager after logging into the product. • Alarm Manager no longer refreshes automatically by default.
• If BMC PatrolView Integration is in place, visibility of parameters below applications has been enhanced by creating another link below the Application Class that displays a view for all the parameters of each class. Performance • Watch Editor performance has been increased by only displaying a subset of affected models, therefore minimizing the time users wait to retrieve their requested list of models. The number of models to display at any given time will be user-definable.
• The “Bring to Front” and “Send to Back” changes made via the Edit mode in the SpectroGRAPH are now saved to the GIB for the current view so that a restart of the SpectroGRAPH displays the desired change. • Automatic map entry timeouts have been added to allow distributed SPECTRUM component entries to age out. This benefits the performance and usability of the server selection start-up dialog of the Control Panel and other distributed applications.
Corrected Issues This section describes issues that have been corrected in SPECTRUM 6.6. ATM Manager Corrected Issues: ATM Manager Item Problem Resolution 1 The ATM Circuit Manager Logical Connection View was not reporting the correct status of modeled ATM circuits if the view was left open. The view was polling load values but only determining the link condition when the view was opened.
Corrected Issues: AutoDiscovery & Modeling Item Problem Resolution 3 When changing a Cabletron device model's community string via Search Manager, the model information view did not always populate the change down to the port and application child models of the device. This was resolved by adding COMMUNITY_STRING to the list of attributes to roll down to port models for Cabletron 6xxx_xx, 9xxx_xx, and 2xxx_xx model types.
Database, Data Export, & Reports Corrected Issues: Database, Data Export, & Reports Item Problem Resolution 1 Reports: When a scheduled entry was saved and the Scheduler dialog was closed, the saved scheduled entry did not get listed when the Scheduler dialog was reopened. This was resolved by making adjustments to show the scheduled entry when the Scheduler dialog was reopened.
Event & Alarm Management Corrected Issues: Event & Alarm Management Item Problem Resolution 1 Alarm Manager: The user was seeing a memory leak when running their Corba application in 6.5.0. This was resolved by adjusting the code to remove the leak. 2 Alarm Manager: ReadOnly only users (ADMIN, 5-9 or anything, 5-9) did not have access to the information or buttons in the Location Tab within any of the PGUI applications.
Corrected Issues: Event & Alarm Management Item Problem Resolution 7 This was resolved by adjusting the file to EMS: The event format file for event 210010 enumerated the 3rd variable of show the correct information in the the event in a table. It should have been appropriate place and format. the second variable that was enumerated. There is no third varbind sent in the trap.
Installation Corrected Issues: Installation Item Problem Resolution 1 Installation crashed when the Install User Name exceeded the limit (20 characters for a username on NT, not including the domain and 64 characters for Solaris). This was resolved by increasing the maximum length allowed for User Name. 2 Patches were intermittently failing when unzipping vtapes. This was resolved by replacing gzip | newtar with a version of newtar that handles gzip compression internally.
Miscellaneous Corrected Issues: Miscellaneous Item Problem Resolution 1 Live Pipes: When the port models in the port link list node were zero, the user received “Access Denied message” in Enable Live Pipe GIB View. This was resolved by adjusting the code to skip permission checking on the model if the model handle is zero. 2 Online Backup: A user attempted to perform online backups on his Windows machine but the backup failed because the tmpdir directory was not being removed.
Management Modules Corrected Issues: Management Modules Item Problem Resolution 1 ADC Cuda: The ADC_Cuda is a Chassis based device. Each card in the Chassis has its own CPU and thus its own discreet SystemUpTime. The system was displaying the Chassis SystemUpTime for the boards rather than the correct board SystemUpTime. This was resolved by importing the mib that supports basSysUpTime into a model type adc_alias_mib that is derived off of the ADC model type.
Corrected Issues: Management Modules Item Problem Resolution 6 A Cisco_Router management module was losing some links to DLCI_Ports when the model was reconfigured. This problem occurred after migrating from SPECTRUM 5.0rev1 and was caused by the Frame Relay Internal_IF_Type attribute being set to 0 instead of 32. This was resolved by creating a new attribute that will check the value of an interface's Internal_If_Type upon SpectroSERVER startup and write the correct value if necessary.
Corrected Issues: Management Modules Item Problem Resolution 13 Host Compaq: In 6.5, the cmpq app models were deprecated and the Host_Compaq model type inherited all the device specific attributes, and new GIB views were created. The user could not find views for the cpqSePci mib information that were there in 6.0.3. The attributes were there, but the user requested new GIB views. Three new GIB views where created for cpqSePciSlotTable, cpqSePciFunctTable and cpqSePciMemoryTable.
Search Manager Corrected Issues: Search Manager Item Problem Resolution 1 While performing a custom search with Search Manager, the user found that “Polling Interval” was being displayed incorrectly. This was resolved by modifying the calculations that are performed against Polling Intervals entered by the client before displaying the value.
Corrected Issues: SpectroGRAPH Item Problem Resolution 2 More information was needed when a SpectroGRAPH received a “Permission Denied” error when it tried to connect to a SpectroSERVER. SecurityManager (SM) reads the .hostrc file after a SpectroSERVER is started or the .hostrc file is updated and tries to resolve all the host entries in .hostrc by OS Service. Sometimes the OS Service did not resolve the network address for some hostnames listed in .hostrc.
SpectroSERVER Corrected Issues: SpectroSERVER Item Problem Resolution 1 FlashGreenEnabled functionality was not This was resolved by adjusting the code working in 06.05.01. so that when FlashGreenEnabled is set to “true” and a model's alarms are cleared, the model will flash green. 2 When available threads values were changed in the VNM -> Configuration -> Thread Information view GUI, the values were written to the database but the $SPECROOT/SS/.vnmrc file was not updated.
Toolkits Corrected Issues: Toolkits Item Problem Resolution 1 If a client program sent a Corba invocation message of This was resolved by ensuring that CsRelationSrvc::testRelMTypeLi CsRelationSrvc::testRelMTypeLi st() throws a VALUE_NULL Corba exception notifying the client program st(), passing a list of CsCModelType::CsCMTypeList that that it is sending a null pointer in the list.
Known Anomalies in SPECTRUM 6.6 This section identifies known anomalies for SPECTRUM and its integrated applications in SPECTRUM 6.6. AR System Gateway Known Anomalies: AR System Gateway Item Description Solution 1 On Solaris, when you run SANM-enabled AR System Gateway with the option -ts set lower than the number of models you are filtering (for example, you have 1,000 models and you set the -ts option to 999 or lower), the swap space is eventually exhausted and SpectroSERVER shuts down.
Control Panel Known Anomalies: Control Panel Item Description Solution 1 When you launch the Control Panel, a list This will be fixed in patch 1. of all SpectroGRAPH only hosts and SpectroSERVER hosts is displayed. In previous versions of SPECTRUM, only SpectroSERVER hosts are displayed. SPECTRUM Software Release Notice (SSRN) For SPECTRUM 6.
Enterprise Alarm Manager (EAM) Known Anomalies: Enterprise Alarm Manager (EAM) Item Description Solution 1 Newly created alarm descriptions in SpectroWATCH do not display in the Alarm Manager if the Alarm Manager was running when the watch and its custom alarm description were created. The alarm displays without a description of the new alarm. Exit the Alarm Manager, then restart it. The new view updates to include the custom alarm description.
Level I Developer’s Toolkit Known Anomalies: Level I Developer’s Toolkit Item Description 1 When you run the MTE and import a MIB There are two workarounds: with an object name longer than 30 1. The first is to identify each MIB characters, you receive the following object with 30+ characters in its message, even when the object does not name and shorten the name before import: running the MTE. The MIB was successfully imported. 2.
SpectroSERVER Known Anomalies: SpectroSERVER Item Description Solution 1 On the Windows NT/2000 server, the operating system is optimized to function as a file server by default. This causes the virtual memory system to assign precedence to the file cache when deciding which memory pages are eligible to be paged out.
SPECTRUM Installation/Uninstallation Programs Known Anomalies: SPECTRUM Installation/Uninstallation Programs Item Description Solution 1 When you install SPECTRUM on Windows Avoid spaces in SPECTRUM user names. NT/2000 with a user name containing a space (for example, NT SPECTRUM) the installation appears to run successfully until the very end, then you receive a message similar to the following: sed: Unterminated ‘s’ command You could possibly receive this message several times.
Brocade Silkworm Switches Management Module Information MM Part Number Device(s) Firmware Version SM-BRC1000 NA Silkworm 2000, 2200, and 2400 families of switches Known Anomalies: Brocade Silkworm Switches Item Description Solution 1 There are no plans to correct this issue. This management module does not create models to represent fiber channel ports. SPECTRUM Software Release Notice (SSRN) For SPECTRUM 6.
Cabletron SmartSwitch 6000 Family Management Module Information MM Part Number Device(s) Firmware Version SM-CSI1076 6E122-26, 6E123-26, 6E123-50, 4.01.10 6E128-26, 6E129-26, 6E132-25, 6E133-25, 6E133-37, 6E133-49, 6E138-25, 6E139-25 6E233-49 SM-CSI1082 6H122-08, 6H122-16, 6H123-50 4.01.10 6H128-08, 6H129-08, 6H133-37 1.01.10 6H202-24, 6H252-17 1.01.10 SM-CSI1088 6M146-04 4.01.
Cabletron SmartSwitch 9000/9500 Management Module Information MM Part Number Device(s) Firmware Version SM-CSI1030 9E13x-xx 2.06.10 SM-CSI1031 9F116-01 2.00.06 SM-CSI1032 9F1xx-xx, 9F2xx-xx 2.00.10 SM-CSI1035 9F4xx-xx 9F31x-xx 1.12.05 6.00.15 1.00.30 SM-CSI1036 9E3xx-xx, 9E4xx-xx 1.12.05 SM-CSI1038 9T122-xx 9T125-xx 1.08.07 1.02.17 SM-CSI1055 9E106-06 2.10.06 SM-CSI1059 9A128-01 9A426-xx 2.10.17 5.00.08 SM-CSI1066 9H42x-xx 1.12.05, 3.01.06 SM-CSI1073 9A656-04, 9A686-04 3.00.
Known Anomalies: SmartSwitch 9000/9500 Item Description Solution 2 You can create SmartSwitch 9000 models in Location or Organization views even though a Contains relation cannot be established with the SmartSwitch chassis model and the models do not show up in the Device view of the SmartSwitch. Do not create SmartSwitch 9000 models in the Location or Organization views. Instead, create them in the Topology view and then copy the Device icon from the Universe Topology view into the Location view.
Known Anomalies: SmartSwitch 9000/9500 Item Description Solution 6 The graph in the ATM Performance view may seem to display information incorrectly. For example, the Log and Lin (Linear) graphs may appear to show 100% of capacity when the cell rate exceeds a certain value. This happens when the graph is used to show both percentages and rates, and has a limitation on the total cell rate the graph can show.
Cisco Catalyst Management Module Information MM Part Number Device(s) Firmware Version SM-CAT1000 SwCat 1200 4.1, 4.21 SM-CAT1001 HubCat 1400 1.5 SM-CAT1002 HubCat 5xxx 2.1 SM-CAT1008 Catalyst 85xx NA Known Anomalies: Cisco Catalyst Item Description Solution 1 The HubCat5000 and HubCat5500 Interface Translation tables show only Interface Index 1. This is a firmware issue.
Cisco Router Management Module Information MM Part Number Device(s) Firmware Version SM-CIS1001 Rtr_Cisco (Cisco Router 2) 11.1(8) Rtr_CiscoIGS, CGS, AGS, MGS, 2500, 3000, 4000, 7000 11.2 Lightstream 10.10 (ATM Support) 11.2(5)/ wa3(2b) SM-CIS1002 Known Anomalies: Cisco Router Item Description Solution 1 The CiscoView menu option and the CiscoView button in the Cisco Router management module do not work.
Data Over Cable System Interface Specification (DOCSIS) Management Module Information MM Part Number Device(s) Firmware Version SM-CSI1097 NA DOCSIS compliant devices Known Anomalies: DOCSIS Item Description Solution 1 When upgrading to SPECTRUM 6.0.3 and Open the Model Information view of the 6.5.0, the GnCableModem model type is DOCSIS cable modem model and adjust the polling interval by a factor of three.
Empire Agent Management Module Information MM Part Number Device(s) Firmware Version SM-EMP1000 NA Empire Agent on Windows NT and Solaris systems Known Anomalies: Empire Agent Item Description Solution 1 Some views may not display Message Queue table information and/or the values of the client attributes listed below, which are in the client NFS statistics and counters branch of the Empire proprietary MIBs.
Enterasys Matrix E5 Management Module Information MM Part Number Device(s) Firmware Version SM-ENT1003 1.03.00, 1.02.04 5C105, 5H102-48, 5H103-48, 5G106-06, 5 SSRM-02 Known Anomalies: Enterasys Matrix E5 Item Description Solution 1 Autodiscovering 5H1xx and 5G1xx devices in a chassis creates Fanout connections rather than Pipes. This is a firmware issue. The devices do not establish two-way communication through the backplane. SPECTRUM Software Release Notice (SSRN) For SPECTRUM 6.
Extreme Devices Management Module Information MM Part Number Device(s) Firmware Version SM-EXT1000 Summit ExtremeWare 2.1.7 Extreme Summit switches BlackDiamond 6808 Core switch BlackDiamond: ExtremeWare 3.09b4 and version 5.0 for policy management Alpine 3808 6.1.7 Summit 48i 6.1.8 Known Anomalies: Extreme Devices Item Description Solution 1 VLAN fault isolation is not supported for Extreme Summit switches running a version of ExtremeWare that is earlier than 6.0.
F5 Networks Management Module Information MM Part Number Device(s) Firmware Version SM-F5N1000 3.1.1 F5 Big-Ip Load Balancer Known Anomalies: F5 Networks Item Description Solution 1 The F5 Big-IP Load Balancer device model does not register trap events and alarms. This is a firmware issue. The device does not properly implement the ipAddrEntry MIB table in compliance with RFC 2011.
Host Compaq Module Management Module Information MM Part Number Device(s) Firmware Version SM-CPQ1000 NA Host Compaq Known Anomalies: Host Compaq Module Item Description Solution 1 The SNMP Agent Detail view does not show statistical information. Also, the view’s Auth Traps field and the Detail view’s Receive Breakdown and Transmit fields are enclosed by red boxes. If you change Auth Traps from disabled to enabled, an attribute error message appears. This is a firmware issue.
Juniper Networks Management Module Information MM Part Number Device(s) SM-JPR1000 Firmware Version M5, M10, M20, M40, M40e, JUNOS 4.0R1.2 M160 Internet Backbone Routers Known Anomalies: Juniper Networks Item Description Solution 1 Juniper Internet JUNOS may incorrectly send OSPF traps (SNMP Version 1) with a non-standard, specific trap number between 9 and 24 when it should be between 1 and 16. As a result, the Juniper model shows these traps as UNKNOWN or displays the wrong event or alarm.
Packeteer PacketShaper Management Module Information MM Part Number Device(s) Firmware Version SM-PKT1000 4.2.0 Packeteer Family Known Anomalies: Packeteer PacketShaper Item Description Solution 1 The Performance view displays incorrect load values. This is a firmware issue. Nortel Contivity Extranet Switch Management Module Information MM Part Number Device(s) Firmware Version SM-NTL1004 4.0.
Riverstone SmartSwitch Router Management Module Information MM Part Number Device(s) Firmware Version SM-RST1000 8.0.0.8 RS-32000, 38000, 8600, 8000, 3000, 2100, 2000 IA-1100, 1200 Known Anomalies: Riverstone SmartSwitch Router Item Description Solution 1 Riverstone SmartSwitch Routers configured with MPLS boards running firmware 8.0.0.8 incorrectly report the operational status as down and the administrative status as off for port interfaces that are configured to be operational.
SmartSwitch Routers (SSR) Management Module Information MM Part Number Device(s) Firmware Version SM-CSI1091 SSR 32000, 8600, 8000, 3000, 2100, 2000, 1200, and IA-1100 NA SM-ENT1005 X-Pedition 8600, 8000, 2100, 2000, and ER16 NA SM-RST1000 RS 32000, 8600, 8000, 3000, 2100, 2000, 1200, and IA-1100 NA SM-ENT1001 6-SSRM-02 NA SM-TRN1000 BE2xx, TL1000, and TLGateway NA Known Anomalies: SSR Item Description Solution 1 The Port Performance view for the SSR 8000 incorrectly displays the in_err
Sun Management Center Agent Management Module Information MM Part Number Device(s) Firmware Version SM-SUN1000 3.0 Workstations and servers supported by the Sun Management Center Agent Known Anomalies: Sun Management Center Agent Item Description Solution 1 The fields in some SPECTRUM views that support the MIB-II SNMP group may not display any values. For example, this could happen in the Performance Detail view. Sun provides two versions of MIB-II support with the Agent.
SynOptics 5000 Hubs Management Module Information MM Part Number Device(s) Firmware Version SM-SYN1003 1.5.1 1.5.1 2.2.6 53xx Enet 55xx TR 59xx FDDI Known Anomalies: SynOptics 5000 Hubs Item Description Solution 1 SynOptics only counts good frames when monitoring Ethernet traffic. As the number of frames with errors goes up, the number of good frames goes down. This directly affects the Load value in the Port, Segment, Cluster, and Attachment Performance views. This is an agent issue.
Known Anomalies: SynOptics 5000 Hubs Item Description Solution 6 Attempts to change all Module Ring Attachments and the Module Ring Speed for all attachments in a Token Ring Module Configuration view fail when done simultaneously during the editing session. This is a firmware issue. Change the Module Ring Attachments then change the Module Ring Speed (or vice versa). Do not try to change both at the same time.
Wellfleet Routers Management Module Information MM Part Number Device(s) Firmware Version SM-WEL1003 NA Wellfleet Router 2 Known Anomalies: Wellfleet Routers Item Description Solution 1 The DCLI ports on the Rtr_Bay_Wflet do not model appropriately when you migrate SPECTRUM from any 5.0rev1 release or higher to any 6.X release. This is because the attribute Create_Sub_Interfaces is set to FALSE by default on the earlier releases. When migrating to 6.X releases, the default value is preserved.
Multiple Management Modules Note: Ignore fields enclosed in red boxes or error messages warning of blank table entries. These indicate that the required data was not obtainable from the device, and they occur when the device firmware does not support these data requests from SPECTRUM. Known Anomalies: Multiple Management Modules Item Description Solution 1 On some model types, SPECTRUM does Restart the SPECTRUM Control Panel after making this type of change.
Discontinued Products and Services This section identifies the discontinued products and services for the SPECTRUM 6.6 release. About Discontinued Products and Services Aprisma is continually reviewing the products that it supports to ensure that they are still in use and fall in line with the product strategy set forth for the company.
Management Modules Table 1 shows discontinued management modules and the recommended migration path. Discontinuation is effective November 15, 2002. Table 1: Discontinued Management Modules Discontinued Part Number Part Number Description Recommended Migration Path SM-ATT1000 AT&T Smart Hub Generic SNMP Module SM-CAY1001 Cayman GatorBox, GatorMIM, or GatorStar devices running firmware version 2.
Table 1: Discontinued Management Modules SM-CSI1053 Cabletron's STHi series of intelligent stackable Token Ring hubs Generic SNMP Module SM-CSI1062 Cabletron's MMAC SmartSwitch and Workgroup SmartSwitch products Generic SNMP Module SM-CSI1077 Cabletron's CyberSWITCH family Generic SNMP Module SM-SYN1007 SynOptics' SNMP-managed Distributed 5xxx Ethernet series Network Management Modules (NMMs), Host Modules and Chassis Generic SNMP Module SM-UNB1001 Ungermann-Bass Access/One hubs.
How will support be handled on these Management Modules? For current maintenance customers, phone support will be provided on the product for one year after the date of discontinuation. Therefore, phone support will be provided until 11/15/2003. For non-maintenance customers, support will be provided on a per incident, time and materials cost basis until 11/15/2002. Please note that support will be limited to troubleshooting the current software components to the best of our ability through product support.
Table 2: Discontinued MM Feature Comparisons SM-CHP1002 Generic SNMP Module • Device Chassis view will be removed. • Power Management, Device Configuration, Chassis Configuration, and Interface Configuration views will be removed. • CComGenBdgApp will be replaced by Gen_Bridge_App • CComPort are no longer modeled.
Table 2: Discontinued MM Feature Comparisons SM-CSI1011 Generic SNMP Module • MRXiRptr models will no longer get created in the App view. • Device Chassis view will be removed. • GenRptrR4Ports are no longer modeled. • DevTop shows Gen_IF_Ports. • DLM_Agent will be removed. SM-CSI1012 GenFddiPort • FddiPort will be replaced by GenFddiPort • Port Configuration View will be removed. SM-CSI1019 Generic SNMP Module • CSI_Bridge will be replaced by Gen_Bridge_App in the app view.
Table 2: Discontinued MM Feature Comparisons SM-CSI1039 Generic SNMP Module • Device Chassis and Device Physical views will be removed. • DLM_Agent will be removed. • CtDownLoadApp will be removed. • CSI_Bridge will be replaced by Gen_Bridge_App • GnSNMPDev discovers RFC1317App SM-CSI1040 Generic SNMP Module • HubCSITR models will longer get created in the App view. • DLM_Agent will be removed.
Table 2: Discontinued MM Feature Comparisons SM-CSI1077 Generic SNMP Module • Device Chassis view will be removed. • CsEnetRptrMgt will be removed. • CtDownLoadApp will be removed. • CSI_Bridge will be replaced by Gen_Bridge_App • MgmtRptrR4Port are no longer modeled. • GnSNMPDev discovers RFC1315App. • GnSNMPDev discovers DSlApp1406. SM-SYN1007 Generic SNMP Module • Syn5DNComApp will be removed. • Syn5DNEnetApp will be removed. • Syn5DNComApp will be removed. • Syn5DNEnetApp will be removed.
EPI, SSAPI, IHAPI, Simulator Playback Tool Table 3 shows discontinued Level II Toolkits and the recommended migration path. Discontinuation is effective November 15, 2002.
Is there a formal program to upgrade customers from EPI, SSAPI, IHAPI, and the Simulator Playback Tool to the recommended migration product? There is not a formal program to migrate either the tools or the resulting work they have been used to complete to the newly recommended products. Customers will be required to complete any migration work themselves or enlist the help of Aprisma Professional Services to complete the work.
Feature Comparison Table 4 compares the features of discontinued products with the features of recommended replacement products. Table 4: Discontinued Level II Toolkit Feature Comparisons Discontinued Product Migration Path ST-Corba ST-CSI1005 SpectroSERVER API (SSAPI) Comparison All functionality available to the customer or partner currently developing applications for SPECTRUM using the SSAPI interface is available in the ST-Corba toolkit.
SpectroRX Discontinuation is effective November 15, 2002. Discontinued Part Number Part Number Description Recommended Migration Path SA-SPECTRORX SpectroRX None Questions & Answers Why is Aprisma discontinuing SpectroRX? Due to the lack of customers utilizing this product, it was determined that this product would be discontinued. What is the recommended migration path? There is no migration path for users of SpectroRX.
Support for Export to SAS, Ingress, Sybase, Oracle, and Microsoft SQL Database Types The following table shows discontinued support and the recommended migration path. Discontinuation is effective November 15, 2002.
There is no formal program to train customers on the recommended migration path. Customers will be wholly responsible for managing any required changes. How will support be handled on Export to SAS, Ingress, Sybase, Oracle, and Microsoft SQL database Types? For current maintenance customers, phone support will be provided on this functionality for one year after the date of discontinuation. Therefore, phone support will be provided until 11/15/2003.
Support for NetScape The following table shows the discontinued product and the recommended migration path. Discontinuation is effective November 15, 2002. Discontinued Functionality / Support Recommended Migration Path Support for Netscape Internet Explorer Version 5.
How will support be handled on Netscape? For current maintenance customers, phone support will be provided on this platform for one year after the date of discontinuation. Therefore, phone support will be provided until 11/15/2003. For non-maintenance customers, support will be provided on a per incident, time and materials cost basis until 11/15/2002. Note that support will be limited to troubleshooting the current software components to the best of our ability through product support.
Products and Functionality Scheduled for Discontinuation in 7.0 Release This section identifies the products and services that are planned for discontinuation for the SPECTRUM 7.0 release.
Device MIB Support • Distributed LAN Monitor • DLSw support • APPN support • PNNI support • Character Stream support (RFC1316) Note to Users Should have you any questions on any of the information found within the discontinuation section of this document, please contact Aprisma Technical Support or your Sales Representative. We at Aprisma are committed to addressing your questions and responding to any suggestions and/or concerns regarding our discontinued products and strategy in the future.
Index Numerics 53xx Enet [59] 9A656-04 [43] 9A686-04 [43] 9E106-06 [43] 9E423-xx [43] 9F12x-xx [43] 9F426-02 [43] 9M426-02 [43] 9T12x-xx [43] 9T425-16 [43] A ASX-100 [52] ASX-200 [52] C Corrected and Known Anomalies-Management Modules BayStack Ethernet Hubs [40] Cabletron SmartSwitch 6000 Family [42] Cabletron SmartSwitch 9000/9500 [43] Cisco Catalyst [46] Cisco Router [47] Empire Agent [49] Enterasys Matrix E5 [50] Extreme Devices [51] F5 Networks [52] ForeRunner Series of ATM Switches [52] Host Compaq M
Corrected and Known Anomalies-SPECTRUM AR System Gateway [35] Enterprise Alarm Manager (EAM) [37] Level I Developer’s Toolkit [38] SpectroSERVER [39] SPECTRUM Alarm Notification Manager (SANM) [39] SPECTRUM Installation Program [40] H HubSyn27xx [60] HubSyn29xx [60] S SM-BAY1000 [40] SM-BRC1000 [41] SM-CAT1000 [46] SM-CAT1001 [46] SM-CAT1002 [46] SM-CAT1008 [46] SM-CIS1001 [47] SM-CIS1002 [47] SM-CSI1030 [43] SM-CSI1031 [43] SM-CSI1032 [43] SM-CSI1035 [43] SM-CSI1036 [43] SM-CSI1038 [43] SM-CSI1055 [43] S
SM-ENT1005 [57] SM-EXT1000 [51] SM-F5N1000 [52] SM-FOR1000 [52] SM-GHO1004 [53] SM-JPR1000 [54] SM-NTL1004 [55] SM-PKT1000 [55] SM-RST1000 [56], [57] SM-SUN1000 [58] SM-SYN1001 [60] SM-SYN1002 [60] SM-SYN1003 [59] SM-SYN1004 [60] SM-SYN1005 [60] SM-SYN1006 [60] SM-SYN1008 [60] SM-SYN1009 [60] SM-TRN1000 [57] SM-WEL1003 [61] SynOptics [60] SynOptics 332xS [60] SynOptics 39xx [60] T TR NMM [59] W Wellfleet Router II [61] Windows NT [53] SPECTRUM Software Release Notice (SSRN) For SPECTRUM 6.
