User manual

Talkwire Operation
80-10100000-09 7–1
7. Talkwire Operation
7.1 Introduction
Talkwire is the name given to the communication protocol which enables
remote control and configuration of a KBU 64 from the command
terminal of your local KBU 64. You can do this, either by placing a call
over the ISDN network to the remote unit, or by using the Kilostream link
(if data is being routed over the ISDN line).
The four primary functions of Talkwire are:
1. Sending messages to the Command terminal screens of remote KBU
64s.
2. To check that a restored Kilostream link is correctly passing data.
3. Remote control of a KBU 64 from your local KBU 64.
4. During backup call to "handshake" with the called KBU64, before
connecting the user to the ISDN.
7.1.1 Line Usage
When using Talkwire, there are three rules of KBU 64 operation which
you should remember, to help you to understand the logic behind
messages returned to your terminal screen;