User manual

KBU 64
User Manual
80-10100000-0910–4
10.4 V.35 LINK
The cable required for connection between the LINK port and your NTU
when configured for V35 operation, should be:
1
2
3
4
5
6
8
9
11
7
14
13
A
P
C
R
F
Y
B
S
T
V
X
aa
H
E
15 Way
FEMALE
D-Type
to
34 Way
MALE
MRAC
Cable part number CAB0008A is available.
The output voltage levels of clocks and data from the KBU 64 are V11
level. An adaptor is available, CAB0021, to reduce the voltages to V35
levels.
All clock and data circuits must be twisted pairs.
If the control circuits are required to be routed independently, i.e. not
looped as above, another cable CAB0031 is available. CAB0031 can
only be used with Issue G or later hardware.