User manual

Hardware Configuration
80-10100000-09 2–1
2. Hardware Configuration
2.1 Introduction
The majority of KBU 64 configuration options are software controlled,
and settings can easily be altered after the unit is installed in the system.
However the physical interface characteristics of the USER and LINK
ports (correct definition is crucial to the operation of your Kilostream
backup unit) are defined using hardware links which are not accessible
without removing the outer casing of the unit.
Although we detail these link configurations, the required settings should
have been selected at installation of your Kilostream backup unit. They
must
only
be altered by your supplier or installation engineer.
WARNING. Access to the internal workings of your KBU 64 is
strictly denied to all users, and may only be performed by suitably
qualified personnel. Any attempt to remove the outer casing of
your Kilostream backup unit will invalidate its approval.
Zone dangereuse! reservée au personnel autorisé. Ne pas ouvrir.
Tensions dangereuses.
Gefäh! Bereich. Nur für fachpersonal. Nicht öffnen
berührungsgefahr!
Pericole! Solo personale addestrato. Non aprire. Tensioni
pericolase all ‘interno.