User manual

Hardware Configuration
80-10100000-09 2–3
User
Equipment
USER 1 LINK 1
V35
V35
V35 V35
KBU 64
N
T
U
Figure 2.1 Interface denomination
Adapter cables are required for connecting from your KBU 64 to the NTU
or user equipment because each of the interface variants transmit
control signals through different physical pins, often using different pin
numbers in a standard connector housing.
Adapter cable specifications are detailed in section 10 and are available
from your KBU 64 supplier.
Several shorting links are required to select V11, V35 or V24/V28. These
are standard 2-way items which electrically connect two adjacent pins on
the link banks.
Figure 2.2 overleaf shows each of the connectors on your KBU 64, and
shows the location of their relevant link banks;
Link bank Connector
A USER 1
B LINK 1
C USER 2
D LINK 2