User manual

Hardware Configuration
80-10100000-09 2–5
2.2.1 USER 1 Interface Characteristics
Figure 2.3 details the link settings required for the three interface options
available (as viewed with the front panel LEDs furthest from you).
Remember USER 1 is the user connected port for your Kilostream
channel 1 (connection via LINK 1), and as such it must be configured to
have the same interface characteristics as LINK 1.
The cable requirements are shown in section 10.
V28 operation
V11 operation
V35 operation
Figure 2.3 USER 1 interface link settings