User manual

KBU 64
User Manual
80-10100000-094–40
You will now have full access to your KBU 64.
If you are not successful, the response will be:
Password mismatch - password disabled
You must now repeat the entry process.
When entry to a password protected KBU 64 is required, you simply
enter the password (the command line will always prompt:
Enter password:
when password entry is needed for access to it).
When the password is changed on a password protected KBU 64 (using
the SET PASSWORD command) the response to the second confirmation
password entry is:
Password changed
4.20.2 Logging Out
To logout from password access, type
1> LOGOUT[CR]
You must enter the password every time when access to a password
protected KBU 64 is required.
4.20.3 Remote Mode
When a KBU 64 accesses a remote KBU 64 which is password
protected, the same command line and operation is presented in remote
mode.
When a password is entered however, the password characters are
echoed on screen, so caution needs to be used, especially in an insecure
environment when entering a remote password.
If for whatever reason talkwire goes inactive during access to a remote
password protected KBU 64, the user is logged out to the remote KBU
64. The password must be entered again for continued access.
(Talkwire inactive could be for instance; call release, B channel errors, a
backup call causing user connection to the ISDN B channel etc.).