User`s guide

Installing the 9H423-26 Module
2-2
Figure 2-1. User-Accessible Components
Setting the Module DIP Switch
The DIP switch on the 9H423-26 module (Figure 2-1 ), is an eight-switch DIP
located near the left, bottom corner of the module. Each switch is set according to
the functions described in Table 2-1. If switch settings are changed, the processor
on the module must be reset, using the reset switch or repowering the module, for
changes to take effect.
St
Boot Prom
Flash
DRAM
Dip Switch
CNXSTATS
Connector
SMB1 Prom
CPM
i960