Installation guide

Page 2-3
SPECIFICATIONS/REQUIREMENTS
Pin 1 RX+
Pin 2 RX-
Pin 3 TX+
Pin 4 No Connection
Pin 5 No Connection
Pin 6 TX-
Pin 7 No Connection
Pin 8 No Connection
123456 87
Port 9 Switched
for Crossed-Over
Operation (X)
Figure 2-2. RJ-45 Port Cross-Over Pin Configuration
BNC Interface (Port 9, MR9T-C)
Type: BNC receptacle, with gold center
contact, for use with BNC type plugs
and RG-58 thin-net cable.
Terminations: Internally connected to a switch-
selectable 50 ohm terminator.
Grounding: The BNC connector shield is not
grounded.