User`s guide

Installing Options
3-2 Installation
.
3.3 INSTALLING OPTIONS
If the 6E233-49 SmartSwitch is to be installed with an optional HSIM, refer to the installation
instructions shipped with the HSIM. The HSIM must be installed before the 6E233-49 is installed
in the chassis.
3.4 INSTALLING THE 6E233-49 SMARTSWITCH INTO THE 6C105
CHASSIS
The 6E233-49 SmartSwitch can be installed in any of the 5 slots that are available in the 6C105. To
install a module, proceed as follows:
1. Remove the blank panel covering the slot in which the module will be installed. All other slots
must remain covered to ensure proper air flow and cooling. (Save the blank plate in the event
you need to remove the module.)
2. Carefully remove the module from the shipping box. (Save the box and packing materials in the
event the module must be reshipped.)
Table 3-1 Contents of 6E233-49 SmartSwitch Carton
Item Quantity
2H252-25 1
Antistatic Wrist Strap 1
RJ21 Adapter/Extender 4
Release Notes 1
Manual Accessory Kit 1
!
CAUTION
Failure to observe static safety precautions could cause damage to the 6E233-49
SmartSwitch. Follow static safety handling rules and properly wear the antistatic wrist
strap provided with the 6C105 chassis.
!
CAUTION
Do not cut the non-conductive bag to remove the module. Damage could result from
sharp objects contacting the board or components.