User`s guide

SASROOT=/local/sas
export SASROOT
iv. Save the edited version and exit from the editor.
Note:
If you want to know more about
dtxscript
, see the document SPECTRUM Data Export User’s Guide.
f. Export the data using SDE and the export script.
SDE uses Export Definition Descriptions, which are templates that control the export process. Because this is your first
time using SDE, you will need to create one of these descriptions.
i. Start SDE.
Select the following from the main SpectroGRAPH window:
File -> Export Data...
ii. Create and save a description for exporting the data.
Set the Landscapes... field to the name of the SPECTRUM management host.
Set the Output Format field to SAS.
Select Statistics in the middle third of the SDE window.
SPECTRUM displays the SDE: Statistics Filter window.
i. Double-click on the HubCSIMRXi entry in the Models/Model Types field in the
Statistics Filter window.
ii. Select all the models of interest by highlighting their model names.
Hint: To select all models for a particular model type, such as HubCSIMRXi, select the model
type name. SPECTRUM will highlight all models belonging to that model type.
iii. Select the attributes that you want to keep in your PDB.
Select Attributes from the list of all attributes that are listed in the Common Attributes part
of the window.
Later, you will want to review the attributes that you select here, in order to check that they match
the variables kept in your PDB.
iv. Select OK.
Specify frequency of exporting data.
To specify that the data that were collected on the previous day should be exported, in the same row of
buttons as the Statistics button under the Export Range heading select:
Custom... -> Day
Select Models in the lower third of the window.
Note: You are not required to export the model data set on a regular basis, only when significant changes
to the network topology have been made. Exporting, as a daily process, assures that you have a model