Specifications

9031035 E4 FDDI Application
7-3
FDDI Application
FDDI Card Performance View
Slot
The relative slot starting from 1 containing this card.
Frames Tx
The count of frames transmitted by the MAC in this concentrator. It includes
all transmitted SMT and LLC frames.
Frames Rc
The count of frames received and repeated on the network by the MAC in this
concentrator.
Frames Copied
The count of frames successfully received into this concentrator’s receive
buffers by the MAC in this concentrator. This count includes all successfully
received SMT and LLC frames.
Frames Lost
The count of frames that are not completely received by the MAC in this
concentrator. A frame may be malformed or incomplete in the event of a ring-
op transition on the network.
Frame In Errors
The count of frames with errors received by the MAC in this concentrator. A
frame with errors may be one with a bad checksum value.
PMD Conf Errors
The count of configuration errors in the PMD of this concentrator.
You can access additional informational fields in the FDDI Card
Configuration Table by double-clicking any column entry in this table. The
fields are described below:
FDDI Card Configuration Table
The FDDI Card Configuration Table provides the following fields:
Slot
The relative slot starting from 1 containing this card.
IP Address
The IP address for this concentrator.
Netmask
The subnet mask associated with the IP address ofthis concentrator. Its value
is an IP address with all the network bits set to 1 and all the host bits set to 0.
Gateway Address
The IP address of the gateway which provides access to other IP networks.
Trap IP
The IP address of the management entity that will receive SNMP trap
notifications.