Specifications

Other Applications
Firmware Application
Other Applications Ungermann Bass Hub
8-6 Management Module Guide
Subnet Mask
The subnet mask used by this device to communicate to the TFTP server. This
value is static and is used only during Supervisor to TFTP server
comminication.
Default Gateway Address
The gateway IP address used by this device to communicate to the remote
TFTP server which resides within another subnet net of the IP network. This
value is static and is used only during Supervisor to TFTP server
communication.
Primary Tftp Server Address
The IP address of the primary TFTP server used to download the operational
files and configuration files to the Supervisor.
Backup Tftp Server Address
The backup or secondary TFTP server used to download the operational files
and configuration files to the Supervisor. This backup TFTP server will be
tried if the primary TFTP server does not respond to the Supervisor.
Boot Filename
This designated boot file is derived from the TFTP server. This very first file
determines if the supervisor will update the boot code on the firmware, create
an upload file on the TFTP host, and determine which files to download from
the TFTP server.
Parms Save Action
This is the status of a request to save the BootP parameters into FLASH
PROM.
Firmware Application
The firmware Application provides the Firmware Information Table as the
only application-specific view.
Firmware Information Table
You may access the application-specific Firmware Information Table by
clicking Information from the Firmware App application Icon Subviews
menu. The fields for this view are described below:
Slot
A value representing the slot position of the module in the enclosure starting
at 1.
Major Version
Represents the firmware revision level for tracking the primary release level.