Specifications

Ungermann Bass Hub Events and Alarms
Event and Alarm Messages Ungermann Bass Hub
9-2 Management Module Guide
Ungermann Bass Hub Events and Alarms
Table 9-1 lists the events and alarms supported by Ungermann Bass
Hub devices.
Table 9-1. Events and Alarms
Event Message Probable Cause Message
001b0001
Access/One hub model {m}: A card was
inserted in slot {I 1}.
Not applicable
001b0002
Access/One hub model {m}: Card {I1} has
been removed.
Not applicable
001b0003
Access/One hub model {m}: Card in slot {I 1}
has become faulty. Its state changed to
moduleFault.
001b0003
The supervisor has detected a faulty
card. The card has developed a
hardware problem.
001b0004
Access/One hub model {m}: Card in slot {I 1}
has not responded to a supervisor poll. Its
state changed to ’notResponding’.
001b0004
The card has developed a hardware
problem.
001b0005
Access/One hub model {m}: Card in slot {I 1}
has been reset. Its state changed to ’reset’.
Not applicable
001b0006
Access/One hub model {m}: Card in slot {I 1}
has been put into debug mode. Its state
changed to ’debugMode’.
001b0006
1) Manual intervention by the
operator.
2)Automatic fault action as specified.
001b0007
Access/One hub model {m}: Card’s {I 1}
temperature has become too high. Its state
changed to ’abnormal’.
001b0007
1) Defective Fan
2) Airflow obstruction.
3) Environment temperature too high.
001b0008
Access/One hub model {m}: The interface to
the Ethernet bus of card {I 1} has been
unlocked. Its state changed to ’unlock’.
Not applicable